Raise your Query

Hi! Simply click below and type your query.

Our experts will reply you very soon.

Need Help? Chat with us

Twitter Facebook

EnglishGermanHindiItalian
Del Pd Pumps & Gears Private Limited




How Do Rotary Gear Pumps Work?

Posted by Admin on November, 27, 2021

A rotary gear pump is a type of positive displacement pump. This moves the fluid on a repetition inside an enclosed fixed volume with the use of interlocking gears and cogs. This transfers it mechanically with the use of cyclic pumping actions. This also helps deliver a smooth plus-free flow proportional to the rotational speed of the gears.

How does It work?


The rotary gear pumps use the action of the rotating gears or cogs to transfer the fluid. The rotating elements help in developing a liquid seal with a pump casting. This helps in creating a suction at the pump inlet. The fluid is drawn inside the pump and it is enclosed within the cavities of the gears which rotates inside the pump. This is then transferred to the discharge. There are mainly two basic designs of rotary gear pumps available and supplied by the rotary gear pumps exporters in India. They are internal and external.

External Gear Pumps


The external pump gear consists of two similar interlocking gears which are supported by two separate shafts. Usually, one gear is driven by the help of the motor and the other drives by this. Sometimes both the shaft is driven by the use of motors. The shafts are given support by the bearing on every side of the casing.


• As the gears come out of the mesh on the inlet side of the pump this helps in creating an expanded volume. The liquid flows into the cavities and is trapped by the gear teeth as the gears continue to rotate against the pump casing.


• The fluid that is trapped is moved from the inlet to the point of discharge around the casing.


• As the teeth of the gears are interlocked on the discharge side of the pump, the volume of the liquid is reduced and the fluid is forced out under extreme pressure.


• No amount of fluid is transferred back through the centre or between the gears. The reason is that these are interlocked with each other. The close tolerances are between the gears. The casing allows the pump to develop a suction at the inlet which helps in preventing the fluid from coming back and leaking for the side of discharge.


The external gear pump designs are used for helical, spur and herringbone gears. These are easily available at the leading rotary gear pump manufacturer Gujarat.

Internal Gear Pumps


The internal rotary gear pumps works on the same way the external pumps do. In these, the two interlocking gears are of different sizes with one rotating inside of the other. The larger gear is the one inside. It has teeth that are projecting inside. Within this is a small external gear mounted off centre. This is designed and manufactured to interlock with the rotor in such a way that the teeth of the gear are engaged at one point.


Look for the best rotary gear pump supplier and get the best machines from them for your use. Compare the price and check the machine well before you buy it from the company.


<< Previous Post Next Post >>

This entry was posted on November, 27, 2021 at 17 : 58 pm and is filed under Gear Pumps. You can follow any responses to this entry through the RSS 2.0 feed. You can leave a response from your own site.

Leave a Comment

(required)
(required) (will not be published)


Looking for Product Name ?